Other Useful Links
By Downloading Pdf file, you are accepting our Site Policies and Terms & Conditions.
SET 1-ECE GATE Exam Previous Papers 2016 | ECE GATE Model Papers 2016
Please find download button below to download the ECE GATE Exam Previous Papers | ECE GATE Model Papers 2015 SET 1
GATE Electronics and Communication Engineering Previous Paper 2016 Details
- Total number of Questions = 65
Few Question are listed below for preview: GATE Electronics and Communication Engineering Previous Paper 2016
1. In an 8085 system, a PUSH operation requires more clock cycles than a POP operation. Which one of the following options is the correct reason for this?
(A) For POP, the data transceivers remain in the same direction as for instruction fetch (memory to processor), whereas for PUSH their direction has to be reversed.
(B) Memory write operations are slower than memory read operations in an 8085 based system.
(C) The stack pointer needs to be pre-decremented before writing registers in a PUSH, whereas a POP operation uses the address already in the stack pointer.
(D) Order of registers has to be interchanged for a PUSH operation, whereas POP uses their natural order
2. A continuous-time sinusoid of frequency 33 Hz is multiplied with a periodic Dirac impulse train of frequency 46 Hz. The resulting signal is passed through an ideal analog low-pass filter with a cutoff frequency of 23 Hz. The fundamental frequency (in Hz) of the output is _________
3. Consider the following statements for a metal oxide semiconductor field effect transistor (MOSFET):
P: As channel length reduces, OFF-state current increases.
Q: As channel length reduces, output resistance increases.
R: As channel length reduces, threshold voltage remains constant.
S: As channel length reduces, ON current increases
Which of the above statements are INCORRECT?
(A) P and Q
(B) P and S
(C) Q and R
(D) R and S
4. A closed-loop control system is stable if the Nyquist plot of the corresponding open-loop transfer function
(A) encircles the s-plane point (−1 + j0) in the counterclockwise direction as many times as the number of right-half s-plane poles.
(B) encircles the s-plane point (0 − j1) in the clockwise direction as many times as the number of right-half s-plane poles.
(C) encircles the s-plane point (−1 + j0) in the counterclockwise direction as many times as the number of left-half s-plane poles.
(D) encircles the s-plane point (−1 + j0) in the counterclockwise direction as many times as the number of right-half s-plane zeros.